The radio will begin to display text on the screen. After Windows Installs the device driver, launch Tetra CPS. While holding keys 1 and 9, Power on the radio. Turn the radio off and connect the programming cable to the bottom accessory port.Ģ. Motorola Portables Radios with full keypads (MTH800, MTP850)ġ. If this occurs, reconnect it by selecting it from the USB menu in your VM software. Note: If you’re running CPS on a virtual machine, you may notice that your USB FTDI cable keeps connecting and disconnecting. Read the radio by right clicking it and choosing Read Radio. If successful, the dialog box will turn green and your radio will appear on the right. In Tetra CPS, Select Tools > Detect Radio on RS232 Port. Note: The display will remain completely blank while pins 6 and 13 are shorted.ĥ.
Connect your FTDI cable to a USB port on your PCĤ. Radio Pin 6 shorted to Radio Pin 13 (this puts the radio in programming mode).ģ. Connect your FTDI cable to the rear of the radio: Right-click on the radio (not the display) and click Read Radio.Ģ.
Within about 60 seconds the radio will appear within Tetra CPS on the right side of the screen.Ĥ. After Windows Installs the device driver, the radio display will turn yellow/orange. Power on the radio and launch Tetra CPSģ. Connect the GCAI cable to the front MIC port, and connect the USB end to your PC.Ģ.
Motorola Mobile Radios Connected via GCAI cable (front)ġ. How you read the radio will depend on how you’ve connected it to your PC: Radio Programming Guide – Part 5: SDS To Change Talkgroups Radio Programming Guide – Part 4: Programming The Basics – Sepura Radio Programming Guide – Part 3: Programming The Basics – Motorola Radio Programming Guide – Part 2: Reading The Radio Radio Programming Guide – Part 1: Things You’ll Need
0 kommentar(er)
